Shenzhen Waweis Technology Co., Ltd.

All
  • All
  • Title
Home> Industry Information> A wireless charger circuit principle design

A wireless charger circuit principle design

January 05, 2019

Waweis Wireless charger

1 Wireless Charger principle and structure

The wireless charging system mainly adopts the principle of electromagnetic induction, and energy transfer through the coil realizes energy transfer. As shown in Figure 1, when the system is working, the input terminal converts the AC mains into a DC power through the full-bridge rectifier circuit, or directly supplies the system with a 24V DC terminal. The DC power output after the power management module is converted into high frequency alternating current by the 2M active crystal oscillator to supply the primary winding. The energy is coupled through two inductor coils, and the current output from the secondary coil is converted into direct current by the conversion circuit to charge the battery.

Wireless charging system block diagram

Power supply circuit

2 .2 Transmitting circuit module

As shown in Figure 3, the main oscillator circuit uses a 2 MHz active crystal oscillator as the oscillator. The square wave of the output of the active crystal oscillator is filtered out by the second-order low-pass filter to obtain a stable sine wave output, which is output to the coil and the capacitor through a class C amplifier circuit composed of a triode 13003 and its peripheral circuits. The parallel resonant circuit radiates out. Provide energy to the receiving part.

Transmitting circuit

3.2 Receive Circuit Module

The core-coupling coil of the parallel resonant circuit composed of capacitance is measured to have a wire diameter of 0.5 mm, a diameter of 7 cm, an inductance of 47 uH, and a carrier frequency of 2 MHz. According to the parallel resonance formula, the matching capacitance C is about 140. pF. Thus. The transmitting portion uses a 2 MHz active crystal oscillator to generate an energy carrier frequency close to the resonant frequency.

Receiving circuit

Charging circuit

in conclusion

Experiments have shown that although the system can not be charged invisibly, it has been able to place multiple school appliances on the same charging platform and charge at the same time, eliminating the trouble of wiring.


Contact Person: Remy Gao
Whatsapp: +8613923810942
Skype: live:remy_gg
Email: flower@waweis.com
Website: www.waweis.com
Address: D402, Building A, C, D, No.130, Hengping Road, Yuanshan Street, Longgang District, Shenzhen, China

The above is the A wireless charger circuit principle design we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> A wireless charger circuit principle design
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send